LEM DHR 100 C10, Hall Effect Current Sensor 100Amp, True RMS 0-10V output
Compact and versatile transducers for high AC and DC currents from 100 to 1000A True RMS with signal conditioning. Choice of output types: 4-20 mA, 0-5 V or 0-10 V, Bandwidth: DC 20..6000 Hz
Features
- VFD and SCR waveforms current measurement
- True RMS output
- 4-20mA current output
- Panel mounting
- Eliminates insertion loss
- Isolated plastic case recognised according to UL94-V0
Advantages
- Large aperture for cable up to ?32mm
- High isolation between primary and secondary circuits
- Easy installation
Applications
-VFD Controlled Loads
VFD output indicates how the motor and attached load are operating
-SCR Controlled Loads
Accurate measurement of phase angle fired or burst fired(time proportional) SCR's. Current measurement gives faster response than temperature measurement
-Application Domain
Energy and Automation
Specification
| LEM Part Number | DHR 100 C10 |
| Technology | Open Loop Hall Effect |
| ROHS | Yes |
| Supply Voltage | 20 - 50V |
| Load Current (RMS + DC) | 100 Amp |
| Output | 0-10V |
| Isolation | 4kV (AC, 50Hz, 1 min) |
| Bandwidth | 20-6000Hz |
| Mounting Style | Panel Mount |
| Operating Temperature Range | -40°C / 70°C |
| Accuracy | 1% |
| Termination Style | SFKC 2.5/4-ST-5.08-RF(Phoenix Contact) |
| Unit Weight | 260g |
| Factory Pack Qty | 6 |
Datasheet
